Pool Care

Everything to know about pH in a Pool & how to balance it

Learn about pH Levels in Your Pool for Optimal Water Quality and Safety

One Minute Read Summary

•pH in a pool is a measure of how acidic or basic the water is, ranging from 0 to 14 with 7 being neutral.

•The ideal pH level for swimming pools should be between 7.4-7.6 ppm and can be tested using special kits or strips that are available at most pool supplies stores

•To decrease pH levels, pH decreaser or muriatic acid can be used; however it must always be handled with care as it could cause harm if not properly protected against them! Add small amounts

•Increasing PH levels requires pH increaser or soda ash - again follow instructions carefully so as not to add too much at once – this will help protect the structure of your pool from damage due to low alkalinity/pH balance over time

•It's very important to maintain an optimal balance as high/low pH levels may cause skin & eye irritation and damage pool equipment & surfaces over time

•Total Alkalinity acts as a buffer for drastic changes in pH - adjusting total alkalinity first will allow proper regulation afterward

Read below for more information

Sapphire Pool Service eliminates your stress, and make your pool look its best!

What is pH in a pool

Is a measure that indicates how acidic or how basic (alkaline) is the water in a pool. High pH (7-14 ppm) = basic or alkaline and Low pH (0-7 ppm) = acidic

What is the ideal pH level in a Pool?

Between 7.4-7.6 ppm

It ranges between 0 and 14, while pure water has a neutral level of 7, and tap or hose water typically falls in the range of 6.5-8.5 (average 7.5). Chlorine and other chemicals can then be added to make it safe for swimming - but these additives may raise or lower your pH, making it either more acidic or alkaline than desired!

How to Test pH in a Pool?

Here is a step-by-step guide

How to Decrease the pH in a Pool?

You can do this by using muriatic acid. When handling it, take extra caution by wearing thick gloves and goggles, plus covering your body with protective clothing and a mask to safeguard against fumes as well as splashback or blowback from unexpected winds.

1: Test pH level

2: Measure the amount of acid needed, for a 10,000 gallons pool you can use from 10 to 30 oz of acid depending on how high your pH level is. You can pour small amounts each day (6-8 oz) so you can test pH levels and avoid adding too much. For a 20,000 gallons pool go double!

3: Add the Muriatic acid with a slow hand, Slowly pour it near your jets in the deeper end of your pool and let the pump do its job by spreading it around (Let the pump run for a few hours). For in-ground pools, take a stroll to evenly spread out the chemical; this will prevent any concentrations so all areas get an equal dose.

4: Test the results after a few hours, repeat the process if necessary

 

How to increase pH in a Pool?

To archive this you can use pH increaser or Soda ash

1: Test pH level

2: Measure the amount of Soda ash you need to use based on the package instructions. For a 10,000 gallons pool you can use between 3-10 oz depending on how low your pH level is. You can put small amounts per day (2-4 oz) so that you can test the pH levels and avoid adding too much. For a 20,000 gallons pool go double!

3: Add the Soda ash, Keep your pump and filter running, and remember a little goes a long way - sprinkle some into your pool, circulate it around, and go slow.

4: Test the results after a few hours or the next day, repeat the process if necessary.

Why is balanced pH important in a Pool?

Keeping the perfect pH level in your pool is essential. Too low or too high, and you're in for some serious consequences:

Side Effects of High pH in a pool:

•Makes chlorine less effective, As pH rises, chlorine loses its power to keep your water looking pristine

•Turn the water cloudy, it causes minerals to come out of solution and form murky sediment. This mineral residue not only impacts the clarity of the water but also affects its composition!

•Produces eyes and skin irritation, having itchy, red eyes and skin irritation may not be the result of too much chlorine - in actuality, high pH levels are often to blame.

•Damage to the pool, calcium scale buildup will not only accumulate on the walls but also clog up essential pieces of equipment, eventually leading to broken pumps and blocked waterways.

Side Effects of Low pH in a pool:

•Harmful effects on the body, not only irritate the eyes and skin, but strip away natural oils that keep your hair looking shiny and smooth. The human body thrives in a slightly neutral environment; any disruptions to this equilibrium are sure to cause discomfort.

•Serious damage to the pool, water with low pH will start to slowly eat away at anything from pumps, mechanical systems, ladders, slides, or diving boards.

What causes pH levels to change in a Pool?

Many factors can affect the pH balance in a pool, people swimming introduce organic compounds that alter the chemistry; even seemingly inconsequential things like rain or leaves blowing into it can cause fluctuations. On top of that salt water systems tend to generate naturally high pH readings - so monitoring this delicate element needs to be a priority for all owners!

How does Total Alkalinity affect pH?

Alkalinity acts as a buffer to protect against drastic changes in pH - if it’s balanced, you don't have to worry about wild swings in pH levels! The relationship between pH and total alkalinity is one of balance. When kept in check, your pool's water chemistry stays steady; too much or little of either can throw the system into chaos.  Adjusting total alkalinity first will be key for proper regulation afterward

Here is more information about alkalinity & how to balance it

Check our latest Articles

By following these guidelines for pool maintenance, you can ensure a clean, safe, and enjoyable swimming environment for you and your family.

Keeping your pool water balanced is crucial for maintaining a safe and enjoyable swimming environment. Learn how to balance your pool water with this complete guide!

Without proper priming, your pump may overheat and sustain damage, leading to costly repairs or replacements. So, take the time to learn how to prime your pump and protect your pool investment!

Say goodbye to unwanted frog visitors with these effective pool protection strategies! Enjoy a frog-free pool all season long!

Say goodbye to mosquitoes with these effective tips! From avoiding peak mosquito times to servicing your pool weekly and inspecting for standing water after rain, we've got you covered.

Dive into the truth about pool myths! From debunking the idea that peeing in the pool turns it blue to clarifying misconceptions about saltwater pools, strong chlorine smells, and the causes of red eyes after swimming, we've got you covered